This master’s thesis deals with the simulation of flow through the normalized orifice plate. There is described flow measurement with flowmeters, which reduces the cross-section of the pipe and causes the pressure difference before and after the flowmeter. Following is a description methods of modeling of turbulent flow and a description of software for the simulation of flow from the company Ansys. The theoretical part is followed a practical part, which is focused on determining the permanent pressure loss caused by the orifice plate and the verification of straight pipeline lengths between orifice and obstacle.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220891 |
| Date | January 2014 |
| Creators | Šimberský, Michal |
| Contributors | Uher, Miroslav, Šedivá, Soňa |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds