The aim of the master´s thesis is to adjust the technology of machining of a die on the CNC lathe so that the total time for the production of a die could be reduced significantly and in this way also the production costs. The analyse of the technology of the machining of the inner part of the die is carried out and a change in the machining of this part is suggested. The new technology is elaborated in two variants when the CAD/CAM system is used for the creation of a programme in a variant and the machining cycles in the other. The technical and economical evaluation is performed at the end of the thesis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230790 |
| Date | January 2013 |
| Creators | Kubášek, Pavel |
| Contributors | Kalivoda, Milan, Osička, Karel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds