Chan, Ngai Shing. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2007. / Includes bibliographical references (leaves 67-70). / Abstracts in English and Chinese. / Abstract --- p.I / 摘要 --- p.III / List of Figures --- p.VI / List of Tables --- p.VIII / Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Background Information --- p.2 / Chapter 1.1.1 --- Project Background --- p.2 / Chapter 1.1.2 --- Literature Review --- p.4 / Chapter 1.1.3 --- Background on Gear Hobbing --- p.10 / Chapter 1.1.4 --- Traditional gear hobbing machines --- p.12 / Chapter 2 --- Design and Testing of the MMT system --- p.15 / Chapter 2.1 --- Specifications of the MMT system --- p.16 / Chapter 2.1.1 --- Overall Configuration --- p.18 / Chapter 2.1.2 --- Linear Actuation --- p.18 / Chapter 2.1.3 --- Main Spindle Assembly --- p.19 / Chapter 2.1.4 --- Tool Plate Assembly --- p.20 / Chapter 2.1.5 --- Motion Control --- p.22 / Chapter 2.2 --- Main Features --- p.24 / Chapter 2.2.1 --- Mechanically Decoupled Gear Hobbing --- p.24 / Chapter 2.2.2 --- Single Setup for Non-planar Gears --- p.26 / Chapter 2.2.3 --- Quality Assurance by Computer Simulation --- p.27 / Chapter 2.3 --- Turning Test --- p.28 / Chapter 2.3.1 --- Experiment Results --- p.29 / Chapter 2.3.2 --- Tornos' Performance --- p.30 / Chapter 2.3.3 --- Estimation of Cutting Force and Workpiece Deflection --- p.32 / Chapter 2.4 --- Synchronization Test --- p.33 / Chapter 2.4.1 --- Experimental Results --- p.34 / Chapter 2.5 --- Gear Hobbing Test --- p.36 / Chapter 3 --- Diagnostic Tool: Gear Hobbing Simulation --- p.40 / Chapter 3.1 --- Simulation Model --- p.41 / Chapter 3.2 --- Simulations with Process Defects --- p.44 / Chapter 3.2.1 --- Asynchronous motion between tool and workpiece spindle --- p.44 / Chapter 3.2.2 --- Pitch error of the cutter hob --- p.45 / Chapter 3.2.3 --- Tool spindle run-out error --- p.47 / Chapter 3.2.4 --- Combination of process defects --- p.49 / Chapter 3.3 --- Experiment Validation --- p.50 / Chapter 4 --- Technical know-hows --- p.55 / Chapter 4.1 --- Premature Part Break-off --- p.55 / Chapter 4.2 --- Tool Alignment and Centering --- p.58 / Chapter 4.2.1 --- Two-turns Aligning Algorithm --- p.59 / Chapter 5 --- Conclusion and Future Work --- p.63 / References --- p.67 / Publication Record --- p.71 / Appendix --- p.72
Identifer | oai:union.ndltd.org:cuhk.edu.hk/oai:cuhk-dr:cuhk_326127 |
Date | January 2007 |
Contributors | Chan, Ngai Shing., Chinese University of Hong Kong Graduate School. Division of Mechanical and Automation Engineering. |
Source Sets | The Chinese University of Hong Kong |
Language | English, Chinese |
Detected Language | English |
Type | Text, bibliography |
Format | print, viii, 72 leaves : ill. (chiefly col.) ; 30 cm. |
Rights | Use of this resource is governed by the terms and conditions of the Creative Commons “Attribution-NonCommercial-NoDerivatives 4.0 International” License (http://creativecommons.org/licenses/by-nc-nd/4.0/) |
Page generated in 0.0025 seconds