Return to search

Využití moderních kompozitních materiálů při návrhu betonových konstrukcí / The use of advanced composite materials for the design of concrete structures

This diploma thesis deals with the design of FRP reinforced concrete structures. The theoretical part is focused mainly on the punching shear of a flat two way slab according to ACI, fib Bulletin, CSA, and JSCE standards. This thesis also includes a description of the punching shear resistance according to Eurocode 2. FRP reinforcement, its mechanical properties, and their behaviour in time are also described. Next, a parametric study was performed that examines the effects of various parameters on the punching shear resistance according to the standards mentioned above. At the end a non-linear analysis using the ATENA software was performed. The practical part includes a structural design of a flat two way slab. The slab uses a steel reinforcement at the bottom, while the top is reinforced with FRP reinforcement. The punching shear design is also included. In the last chapter the serviceability limit state is checked, specifically the slab long-term deflection. The thesis also includes drawings. All calculations were performed in accordance with Eurocode 2 and fib Bulletin No. 40.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:409787
Date January 2020
CreatorsBártová, Denisa
ContributorsMatušíková, Anna, Girgle, František
PublisherVysoké učení technické v Brně. Fakulta stavební
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0023 seconds