With the introduction of Internet of Things (IoT) technology in several sectors, wireless,
reliable, and energy-saving communication in distributed sensor networks are more important than
ever. Thereby, wake-up technologies are becoming increasingly important as they significantly
contribute to reducing the energy consumption of wireless sensor nodes. In an indoor environment,
the use of wireless sensors, in general, is more challenging due to signal fading and reflections and
needs, therefore, to be critically investigated. This paper discusses the performance analysis of wakeup
receiver (WuRx) architectures based on two low frequency (LF) amplifier approaches with regard
to sensitivity, power consumption, and package error rate (PER). Factors that affect systems were
compared and analyzed by analytical modeling, simulation results, and experimental studies with
both architectures. The developedWuRx operates in the 868MHz band using on-off-keying (OOK)
signals while supporting address detection to wake up only the targeted network node. By using
an indoor setup, the signal strength and PER of received signal strength indicator (RSSI) in different
rooms and distances were determined to build a wireless sensor network. The results show a wake-up
packets (WuPts) detection probability of about 90% for an interior distance of up to 34 m.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:85935 |
| Date | 09 June 2023 |
| Creators | Schott, Lydia, Fromm, Robert, Bouattour, Ghada, Kanoun, Olfa, Derbel, Faouzi |
| Publisher | MDPI |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 2169 |
Page generated in 0.0022 seconds