This thesis presents a procedure to optimise the shape of a coaxial transducer ultrasonic flow meter. The technique uses separate numerical simulations of the fluid flow and the ultrasound propagation within a meter duct. A new flow meter geometry has been developed, having a significantly improved (smooth and monotonic) calibration curve. In this work the complex fluid flow field and its influence on the propagation of ultrasound in a cylindrical flow meter duct is investigated. A geometric acoustics (ray tracing) propagation model is applied to a flow field calculated by a commercial Computational Fluid Dynamics (CFD) package. The simulation results are compared to measured calibration curves for a variety of meter geometries having varying lengths and duct diameters. The modelling shows reasonable agreement to the calibration characteristics for several meter geometries over a Reynolds number range of 100...100000 (based on bulk velocity and meter duct diameter). Various CFD simulations are validated against flow visualisation measurements, Laser Doppler Velocimetry measurements or published results. The thesis includes software to calculate the acoustic ray propagation and also to calculate the optimal shape for the annular gap around the transducer housings in order to achieve desired flow acceleration. A dimensionless number is proposed to characterise the mean deflection of an acoustic beam due to interaction with a fluid flow profile (or acoustic velocity gradient). For flow in a cylindrical duct, the 'acoustic beam deflection number' is defined as M g* (L/D)^2, where: M is the Mach Number of the bulk velocity; g* is the average non-dimensionalised velocity gradient insonified by the acoustic beam (g* is a function of transducer diameter - typically g* = 0.5...4.5); L is the transducer separation; and D is the duct diameter. Large values of this number indicate considerable beam deflection that may lead to undesirable wall reflections and diffraction effects. For a single path coaxial transducer ultrasonic flow meter, there are practical limits to the length of a flow meter and to the maximum size of a transducer for a given duct diameter. The 'acoustic beam deflection number' characterises the effect of these parameters.
| Identifer | oai:union.ndltd.org:ADTP/233992 |
| Date | January 2002 |
| Creators | Temperley, Neil Colin, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Neil Colin Temperley, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0021 seconds