<p>U ovoj doktorskoj disertaciji prikazana je koncepcija, realizacija i potvrda nove metode<br />jednovremenog etaloniranja strujnih mernih transformatora sa dve različite merne<br />aparature. Pregledom stručne literature ne postoji podatak da je ova metoda ranije<br />primenjivana. U disertaciji su prikazane različite merne metode za ispitivanje i<br />etaloniranje mernih transformatora koje imaju primenu u savremenoj praksi i koje<br />podrazumevaju i različite merne mogućnosti. Takođe je i ekperimentalno potvrđeno<br />jednovremeno ispitivanje i etaloniranje strujnih mernih transformatora sa nekoliko<br />mernih aparatura koje su zasnovane na različitim metodama. Sprovedna istraživanja i<br />eksperimentalni rezultati pokazuju i potvrđuju niz prednosti ovakvog načina<br />etaloniranja. Detaljna analiza komponenti merne nesigurnosti pokazala je da se<br />primenom ove metode postiže poboljšanje merne nesigurnost etaloniranja za skoro red<br />veličine u odnosu na klasično pojedinačno etaloniranje sa dve različite merne<br />aparature. Analiza uticajnih veličina na mernu nesigurnost pokazuje da se po ovoj novoj<br />metodi etaloniranja eliminiše niz komponenti od kojih su najznačajnije: uticaj<br />nejednakosti referentnih struja i ispitnog opterećenja. Istraživanja su takođe pokazala<br />da jednovremena metoda osim što doprinosi podizanju tačnosti etaloniranja strujnih<br />transformatora, ima primenu i u etaloniranju mernih aparatura za ispitivanje tačnosti<br />mernih transformatora i interkonparaciji strujnih etalon transformatora. Kroz<br />konkretne primere realizovane u praksi, razmotreni su i prikazani načini etaloniranja<br />mernih aparatura za ispitivanje tačnosti ovom novom metodom. Interkomparacijom dva<br />merna sistema visoke klase tačnosti Nacionalnog merološkog instituta Kanade<br />(National Research Council Canada), od kojih je jedna razvijena u Elektrotehničkom<br />Institutu "Nikola Tesla", pokazana je i prednost primene jednovremene metode u oblasti<br />primarne metrologije strujnih mernih transformatora.</p> / <p>The dissertation presents the concept, its realisation and verification of the new method<br />of simultaneous comparison of the current transformers by two different measuring<br />apparatus. It is shown by searching the literature, that this method has not been used<br />before. In this dissertation different measuring methods for testing and calibration of<br />current transformers, with their different measuring capabilities are presented. Most of<br />them have been used in recent practice. Furthermore, the experimental verification of<br />new simultaneous calibration method is presented. For this reason some measuring<br />apparatus based on different measuring methods were used. Conducted research and<br />experimental results confirmed a number of advantages of this calibration method.<br />Detailed analysis of the components of the uncertainty of measurements shown that<br />using simultaneous method uncertainty of measurements have been improved<br />comparing to method with two individual calibration by different apparatus. In that case<br />some of the measuring uncertainty components can be neglected. The most significant<br />is component caused by variation of referent current and component caused by variation<br />of burden. The research has also showed that simultaneous method can be used for<br />calibration of measuring apparatus for current transformer accuracy testing and their<br />inter-comparisons. The ways of calibration of apparatus for current transformer accuracy<br />testing are considered and presented, through concrete examples realized in practice.<br />A high-accuracy comparison of two NRC (National Research Council Canada)<br />calibration systems were carried out by new simultaneous method. One measuring<br />system is developed at Electrical Engineering institute Nicola Tesla, Belgrade.<br />Accordingly the advantage of simultaneous method applied at the primary metrology of<br />current transformer is verified.</p>
| Identifer | oai:union.ndltd.org:uns.ac.rs/oai:CRISUNS:(BISIS)107383 |
| Date | 29 August 2018 |
| Creators | Naumović Vuković Dragana |
| Contributors | Mitrović Zoran, Sovilj Platon, Kovačević Dragan, Pejić Dragan, Antić Boris |
| Publisher | Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, University of Novi Sad, Faculty of Technical Sciences at Novi Sad |
| Source Sets | University of Novi Sad |
| Language | Serbian |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0032 seconds