Return to search

Irrigação e fertirrigação em um sistema de aspersão convencional submetido à técnicas de controle estatístico de qualidade. / Irrigation and fertigation in sprinkler system submitted to techniques of statistical quality control

Made available in DSpace on 2017-07-10T19:24:27Z (GMT). No. of bitstreams: 1
Andre Luiz Justi.pdf: 417849 bytes, checksum: 8c0574623c4c093e98515ba5e1e5e5c8 (MD5)
Previous issue date: 2008-07-10 / The contribution of irrigation in the alimentary supply, is due to the fact of more
and more to look for more efficient systems, monitoring the indexes of
uniformity of distribution of the water. The application of fertilizers through
irrigation water took very big pulse in the last times, mainly due to the
emergence of pressurized systems, of the tunnels of plastic, of the increment of
the located irrigation and of the researches proving that the application of liquid
fertilizers becomes more appropriate to the plants, to the soil and, besides
under the analysis of the involved economical aspects. Being necessary tests to
verify the system this operating appropriately in field in order to avoid losses so
much in productivity as maintenance of systems. It was aimed at with this work
to evaluate an overhead irrigation for aspersion, so much in the application of
water as in the fertilizer application, and to submit him/it to quality control
techniques to evaluate the capacity of the process. The experiment was driven
in the Experimental Nucleus of Engineering Agricultural, belonging the State
University of the West of Paraná, located in the km 95 of the highway BR 467.
They were appraised 25 irrigations and 25 fertigations, following the established
methodology for NBR 7749 (ABNT, 1999). For the irrigation, they were obtained
values of Coefficient of Uniformity of Christiansen (CUC) of 72,25 and 89,45%
as values minimum and maximum, and a medium CUC of 79,72%, considered
value below the minimum of 80% for irrigation for aspersion, and the system
operated in wind conditions with speeds of up to 2,97 m.s-1. For fertigation, the
values of found CUC were 70,91 and 81,04% as minimum and maximum, and a
medium CUC of 77,14%, under maximum wind of 2,18 m.s-1.Aplicando the
quality control tests, for the irrigation with water, it was obtained a correlation
index between CUC and the speed of the wind of 83,6% and 68,4% for the
irrigation and fertigation, respectively and a correlation among CUC and to the
index of capacity of process (CP) of 63,3 and 20,9% for the irrigation and
fertigation, respectively. / A contribuição da irrigação no suprimento alimentar, se deve ao fato de cada
vez mais buscar-se sistemas mais eficientes, monitorando os índices de
uniformidade de distribuição da água. A aplicação de fertilizantes via água de
irrigação tomou impulso muito grande nos últimos tempos, principalmente
devido ao aparecimento de sistemas pressurizados, dos túneis de plástico, do
incremento da irrigação localizada e das pesquisas comprovando que a
aplicação de adubos líquidos torna-se mais adequada às plantas, ao solo e,
inclusive sob a análise dos aspectos econômicos envolvidos. Sendo
necessários testes para verificar se o sistema esta operando adequadamente
em campo a fim de evitar perdas tanto em produtividade quanto manutenção
dos sistemas. Objetivou-se com este trabalho avaliar um sistema de irrigação
por aspersão, tanto na aplicação de água como na aplicação de fertilizante, e
submetê-lo a técnicas de controle de qualidade para avaliar a capacidade do
processo. O experimento foi conduzido no Núcleo Experimental de Engenharia
Agrícola, pertencente à Universidade Estadual do Oeste do Paraná, localizado
no km 95 da rodovia BR 467. Foram avaliadas 25 irrigações e 25 fertirrigações,
seguindo a metodologia estabelecida pela NBR 7749 (ABNT, 1999). Para a
irrigação, foram obtidos valores de Coeficiente de Uniformidade de
Christiansen (CUC) de 72,25 e 89,45% como valores mínimo e máximo, e um
CUC médio de 79,72%, considerado valor abaixo do mínimo de 80% para
irrigação por aspersão, sendo que o sistema operou em condições de vento
com velocidades de até 2,97 m.s-1. Para fertirrigação, os valores de CUC
encontrados foram 70,91 e 81,04% como mínimo e máximo, e um CUC médio
de 77,14%, sob vento máximo de 2,18 m.s-1. Aplicando os testes de controle de
qualidade, para a irrigação com água, foi obtido um índice de correlação entre
o CUC e a velocidade do vento de 83,6% e 68,4% para a irrigação e
fertirrigação, respectivamente e uma correlação entre o CUC e a o índice de
capacidade do processo (CP) de 63,3 e 20,9% para a irrigação e fertirrigação,
respectivamente.

Identiferoai:union.ndltd.org:IBICT/oai:tede.unioeste.br:tede/2743
Date10 July 2008
CreatorsJusti, André Luiz
ContributorsBoas, Marcio Antonio Vilas, Nóbrega, Lúcia Helena Pereira, Mucelin, Carlos Alberto
PublisherUniversidade Estadual do Oeste do Parana, Programa de Pós-Graduação "Stricto Sensu" em Engenharia Agrícola, UNIOESTE, BR, Engenharia
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações do UNIOESTE, instname:Universidade Estadual do Oeste do Paraná, instacron:UNIOESTE
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0026 seconds