The thesis deals with the design of a suitable technology for serial production of a pin. The component material is structural steel 11,320 5R. Due to the series production and material savings, the molding technology was chosen to be cold. For production, the CM 4-5 ECO HATEBUR process press was designed with a nominal force of 1 700 kN. Progressive tool and drawing documentation of tools for the final operation were also designed. The tool load was verified by manual calculation, and the finite element method was calculated to heat the formed blank due to molding.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:316691 |
Date | January 2017 |
Creators | Vávra, Roman |
Contributors | Šlais, Miroslav, Řiháček, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds