Diploma thesis focus on the proposal of the carrier pin production from the steel 17 021 by cold bulk forming technology with sight on the upsetting and extrusion. There were suggested two versions of the technological plan from which was one chosen as optimal. There were carried out calculation of deformation, forming and deformation resistances and forming forces for the chosen version. Machine for the part TPM 12 production was chosen on the basis of the global forming force 660 kN. Furthermore there were proposed forming tools for the second operation – feed forward extrusion. Finally there was made technical and economical evaluation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231209 |
Date | January 2014 |
Creators | Sejkora, Petr |
Contributors | Samek, Radko, Forejt, Milan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds