This diploma thesis deals with design of end effector for collaborative robot which manipulates with RFID labels. The first part of this thesis is theoretical and deals with collaborative robots and end effector for these collaborative robots. The second part of this thesis is practical and begins with selecting the suitable collaborative robot to tackle this issue and then there are presented several variants of end effectors where is again chosen the suitable one. In the next step there are made design calculations for the chosen variant followed by verifications consisted of practical tests of functionality and CFD simulation. According to made verifications is developed the final construction solution of the chosen end effector variant that includes a commentary about the construction documentation. The next step consists of making risk analysis used for reducing the risks leading to increase the workplace safety. In the last part is made an estimation of the cost of eventual production of one piece of the end effector protype.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417750 |
| Date | January 2020 |
| Creators | Taoufik, Ismael |
| Contributors | Blecha, Radim, Knoflíček, Radek |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds