Hydropower plants with spillways exposed to high pressures because of large discharges can result in a dam failure which ultimately results in devastating consequences. Therefore properly designed and constructed spillways are important. In this project there is an interest in examining the pressure distribution on a guided wall, measuring the water level inside the spillway and examine the water flow characteristics. The main purpose was to numerically model the flow behaviors at two upper pool levels +29.82 m and +30.92 m in order to achieve a comparison between a numerical model and a physical model. A previous experiment was carried out at Vattenfall R&D in Älvkarleby where a physical model was built. The main purpose of that study was to find an optimal form of a guide wall for free weir flow. This study served as guidelines for what should be investigated in this project. The methodology of the project began with a development of an initial CAD model created by Vattenfall R&D. The CFD model could be constructed into a volume model containing also an upstream reservoir. Next, a mesh that could numerically calculate the flow behavior was created in order to enable execution of the calculations. Furthermore, a big part of the method was to adjust the settings in Fluent so that the numerical model could recreate the flow behaviors of the physical model tests. The results indicate that the numerical model is an accurate replica of the physical model. The deviation comprising the mass flow rate came as close as 0.6 % from the physical model for the lower upper pool level. Highest calculated pressure was positioned at the bottom of the guided wall for both upper pool levels, which the results conducted from the physical model also indicated. Furthermore, results regarding the water level at the guided wall confirmed same statement Vattenfall's examinations pointed out, that the roof placed at the guided wall is needed in order to avoid major splashing. The present project has shown great results regarding the flow characteristics, pressure distribution, and the water level at the guided wall. Therefore, it is considered trustworthy enough to be used as a tool for Vattenfall R&D in future studies comprising the targeted spillway.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-173465 |
Date | January 2020 |
Creators | Björnfot, Mikael |
Publisher | Umeå universitet, Institutionen för tillämpad fysik och elektronik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds