An autonomous machine is a machine that can navigate through its environment without human interactions. These machines use sensors to sense the environment and have computing abilities for receiving and interpreting the sensory data as well as for controlling their displacement. At the University of Saskatchewan (Saskatoon, Canada), a low level autonomous machine was developed. This low level machine was the sensor system for an autonomous machine. The machine was capable of sensing the environment and carrying out actions based on commands sent to it. This machine provided a sensing and control layer, but the path planning (decision making) part of the autonomous machine was not developed.<p>This autonomous machine was developed on a Case IH DX 34H tractor with the purpose of providing a machine for testing software and sensors in a true agricultural environment. The tractor was equipped with sensors capable of sensing the speed and heading of the tractor. A control architecture was developed that received input commands from a human or computer in the form of a target heading and speed. The control architecture then adjusted controls on the tractor to make the tractor reach and maintain the target heading and speed until a new command was provided. The tractor was capable of being used in all kinds of weather, although some minor issues arose when testing in rain and snow. The sensor platform developed was found to be insufficient for proper control. The control structure appeared to work correctly, but was hindered by the poor sensor platform performance.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-08252008-123054 |
| Date | 05 September 2008 |
| Creators | Griffith, Jason Carl |
| Contributors | Maule, Charles P., Laguë, Claude, Daku, Brian L., Roberge, Martin |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-08252008-123054/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0025 seconds