Linear vibration measurement and analysis techniques have appeared to be
sufficient with most vibration problems. This is partially due to the lack of proper
identification of physical nonlinear dynamic responses. Therefore, as an example, a
vehicle driveshaft exhibits a nonlinear super harmonic jump due to nonconstant velocity,
NCV, joint excitation. Previously documented measurements or analytical predictions
of vehicle driveshaft systems do not indicate nonlinear jump as a typical vibration mode.
The nonlinear jump was both measured on a driveshaft test rig and simulated with a
correlated model reproduced the jump. Subsequent development of the applied
moments and simplified equations of motion provided the basis for nonlinear analysis.
The nonlinear analyses included bifurcation, Poincare, Lyapunov Exponent, and
identification of multiple solutions.
Previous analytical models of driveshafts incorporating NCV joints are typically
simple lumped parameter models. Complexity of models produce significant
processing costs to completing significant analysis, and therefore large DOF systems incorporating significant flexibility are not analyzed. Therefore, a generalized method
for creating simplified equations of motion while retaining integrity of the base system
was developed. This method includes modal coupling, modal modification, and modal
truncation techniques applied with nonlinear constraint conditions. Correlation of
resonances and simulation results to operating results were accomplished.
Previous NCV joint analyses address only the torsional degree of freedom.
Limited background on lateral excitations and vibrations exist, and primarily focus on
friction in the NCV joint or significant applied load. Therefore, the secondary moment
was developed from the NCV joint excitation for application to the driveshaft system.
This derivation provides detailed understanding of the vibration harmonic excitations
due to NCV joints operating at misalignment angles.
The model provides a basis for completing nonlinear analysis studying the
system in more detail. Bifurcation analysis identified ranges of misalignment angles and
speeds that produced nonlinear responses. Lyapunov Exponent analysis identified that
these ranges were chaotic in nature. In addition, these analyses isolated the nonlinear
response to the addition of the ITD nonlinear stiffness.
In summary, the system and analysis show how an ITD installed to attenuate
unwanted vibrations can cause other objectionable nonlinear response characteristics.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2009-05-473 |
| Date | 2009 May 1900 |
| Creators | Browne, Michael |
| Contributors | Palazzolo, Alan |
| Source Sets | Texas A and M University |
| Language | English |
| Detected Language | English |
| Type | Book, Thesis, Electronic Dissertation, text |
| Format | application/pdf |
Page generated in 0.1511 seconds