This thesis focuses on stress-strain analysis of the upper central incisor with applied veneer and its variations with proximal fillings and endodontic treatment. The basic materials and veneer types are introduced at the beginning. Next chapter describes the creation of geometric models of a healthy tooth, veneers and fillings. The veneer geometry model has been done in several variants, taking different thickness values, veneer ranges and used materials into account. A finite element mesh was applied to the models. The computation model was solved using the finite element method using the ANSYS 14.0 software in the Workbench graphics environment. The results of the analysis show that the composite material is more suitable for veneers placed partially in the dentin - either with proximal fillings or without them. The ceramic material is a better option for endodontic treatment. Veneers located in the enamel are not significantly affected by the choice of material and the ceramic material is more appropriate only when proximal fillings are applied.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231457 |
Date | January 2014 |
Creators | Valenta, Jiří |
Contributors | Valášek, Jiří, Marcián, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds