McMaster University in conjunction with an industrial partner has been designing wireless vibrational condition monitoring sensors for implementation on a vibrating screening machine used in mining applications. A limitation with the current sensor design is their dependency on battery power. In order for the sensors to provide real-time continuous streaming of acceleration data, an alternate power supply was required outside of traditional sources such as batteries or wired power.
This thesis outlines the research and development of a power system that harvests the kinetic vibrational energy of a mining screen and converts it into electrical energy for use by a wireless sensor node. During development, multiple prototypes were built and evaluated under laboratory conditions. The core concept of the system is an eccentric pendulum mass excited by the external vibrations of the screening machine used to drive a stepper motor generator. The major design obstacle of the project was how to get the system to self initiate. Both a mechanical and an electrical solution were developed to solve this concern. The final prototype design is fully autonomous, able to react to the start up or shut-down of a screening machine, while also providing a continuous power supply to a wireless vibrational analysis sensor as tested in the lab. With minor optimization, this prototype can be turned into a commercial product for industrial implementation and sale. / Thesis / Master of Applied Science (MASc)
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/16134 |
Date | 11 1900 |
Creators | Wilson, Aaron M. E. |
Contributors | Mohrenschildt, Martin v., Computing and Software |
Source Sets | McMaster University |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.0013 seconds