This diploma thesis is focused on design and prototyping of wireless optical link for an indoor usage. In the beginning of the thesis frequency spectrums of infrared, visible and ultraviolet light are described by its typical qualities such as values of attenuation or reflection capability. On the basis of this analysis, a proper wavelength has been chosen for usage at the engineered communication system. Next part is devoted to selection of suitable communication components on basis of its declared qualities. In the following chapter this qualities are in carefully measured and after that they are compared with values provided by its manufacturer. The following section is devoted to design schemes of transceiver modules. After completion of the design the manufacturing of PCB, mounting components and the analysis of their distribution was described. The last part of this thesis deals with testing of created prototype in terms of maximum transmission distances and operating frequencies. At the very end of this project, in one small section ways to improve system characteristics was discussed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219157 |
| Date | January 2011 |
| Creators | Kovář, Ondřej |
| Contributors | Látal, Jan, Diblík, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds