The diploma thesis deals with treatment of surface waters containing humic substances. The most often used method of surface water treatment is coagulation with subsequent separation of aggregates. In this study, only perikinetic coagulation phase was studied. It is the phase when aggregates are formed by the Brownian motion only, i.e. without mixing. Separation of the formed aggregates was made by centrifugation. Coagulation tests were made under the laboratory conditions with model humic water. Humic substances were added from a concentrate, which was taken from a natural peatbog. The influence of temperature on the coagulation process was studied, ranging from 5 to 22 °C. Chitosan (natural biopolymer) was used as coagulant. In present, it is not used in Czech water treatment practice yet. No effect of temperature was observed when chitosan was used as coagulant. Influence of temperature was also studied with the use of aluminium and ferrous sulphates, which are used in common praxis as coagulation reagents. Influence of the temperature was observed and is in agreement with previously reported data of pilot-plant experiments by other researchers. Spectroscopic methods were used to evaluate the coagulation efficiency and determine residual concentration of aluminium and ferrous coagulant. Chemical oxygen demand (COD) was determined for optimal doses. At first, coagulation tests were made under the laboratory temperature. This tests determined optimal aggregation time and optimal coagulant dose under low temperature. Afterwards, all coagulants used were compared at given temperatures.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216387 |
Date | January 2008 |
Creators | Leskovjanová, Jana |
Contributors | Mega, Jaroslav, Dolejš, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta chemická |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds