This thesis deal with design and implementation of innovative cooling method, intended primarily for medium-power synchronous generators. The main objective of this proposal is to remove the large heat exchanger connected to generator. This heat exchanger unduly increases the space requirements for the machine location. The proposed solution is to use a direct water-cooled stator. It is assumed that the rotor winding will be still cooled by air. Unlike current cooling system, the hot air from the rotor can be cooled in smaller cooler inside the generator. In this work are described methods which can be used for design of water cooling basic parameters, taking required temperatures into account. A small induction motor was selected for practical verification of the proposed cooling concept. This motor was modified into two variants - related to the old cooling of synchronous generators and related to the proposed solution. Both of these variants were measured and compared with each other. Subsequently, CFD models of these two variants were set up. Measured temperatures were used for debugging of models and identification of material properties of components of these machines. The final model of water-cooled variant also makes it possible to simulate the work of motor for higher performance and to determine the overload compared with the old cooling variant. Some knowledge and experience obtained from the small water-cooled induction machine were used in the design of water-cooling for large synchronous generator. In a similar way, CFD models of the old variant of cooling and proposed variant of water- cooling were created. Although these models were not verified by actual measurements on the generators, the results indicated that the application of water-cooling in this type of machine is appropriate and provides many benefits.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233962 |
| Date | January 2011 |
| Creators | Sikora, Michal |
| Contributors | Kratochvíl, Ctirad |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds