The aim of this work was to improve the heat capacity estimation of a material for usage within a CALPHAD-type assessment. An algorithm is derived that estimates the trend of heat capacity with temperature based on zero Kelvin properties and the thermal expansion coefficient at the Debye temperature. The algorithm predicts not only the trend of heat capacity but also the temperature trend of the volume and the bulk modulus, which can be also included in new thermodynamic databases. The algorithm is used to assess thermophysical properties of the intermetallic phases eta (Fe2Al5), epsilon~(Fe5Al8) and tau4 (FeAl3Si2).
The heat capacity of the intermetallic phases zeta, eta, theta and epsilon of the Al-Fe system and of tau4 of the Al-Fe-Si system was measured using DSC. For the phases zeta, eta, and theta, a non-linearly increasing heat capacity approaching the melting temperature was observed. In addition, the heat capacity of three bcc-based Al-Fe samples including the B2-->A2 transition were determined.
The Al-rich section of the Al-Fe phase diagram was studied using DTA and quenching experiments. The homogeneity ranges of the intermetallic phases were determined using SEM/WDS measurements.
Based on own and literature values, a thermodynamic description of the Al-Fe system was assessed including the modelling of A2/B2 ordering and the homogeneity range of all intermetallic phases. In addition, thermodynamic parameters of the Al-Fe-Si, Al-Fe-Mg, and the Fe-Mg-Si system were assessed to obtain a thermodynamic description of the Al-rich side of the Al-Fe-Si-Mg system, which can be used to study phase transitions of typical A356-aluminium alloys.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:23542 |
Date | 10 August 2018 |
Creators | Zienert, Tilo |
Contributors | Leineweber, Andreas, Flandorfer, Hans, Fabrichnaya, Olga, TU Bergakademie Freiberg |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds