This project is dealt with optimalization of moulding procedure of plastic housing of headlamp for project DCW 204 Mopf halogen. The aim is reach a shorter injection moulding cycle time with keeping of claim quality of plastic part. Optimalization will be done based on modification of moulding pressing time. We observe warpage in axis X in the most problematical points of housing by using of contactless measuring optical technologie ATOS III Triple Scan. Simulation analysis for injection moulding was used for prediction of housing warpage up to unforming in every chosen moulding pressing time. According to reaching data in this way comparison of predicted warpage was able to done up to unforming time and real warpage of housing after unforming. According to reaching data in a different period of time warpage of housing during time flowing was observed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229927 |
| Date | January 2011 |
| Creators | Hamáček, Richard |
| Contributors | Hlaváček, Martin, Kandus, Bohumil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0329 seconds