The river water quality management strategy involves a series of complex inter-disciplinary decisions based on speculated responses of water and sediment quality to changing controls. In the aquatic system a rapid removal of the heavy metals from the water to sediments may occur by settling particles while some of these pollutants can be mobilized by getting accumulated into the biota from the sediments sink. Thus, sediment plays a major role in the determining pollution pattern of aquatic systems. It acts as both carriers and sinks for contaminants, reflecting the history of pollution, and providing a record of catchment inputs into aquatic ecosystems.
The Yan Shuei Gang River watershed is one the river watersheds in Kaohsiung City, Taiwan. It is 5-km long, drains a catchment of more than 1,200 ha. Part of the river water is from the domestic drainage areas located in the upper catchment. In Linhai Industrial Parks, there are more than 493 registered industrial factories that discharge their wastewater into the Yan Shuei Gang River. Thus, recent water and sediments quality analysis indicates that the Yan Shuei Gang River is heavily polluted.
The major objectives of this study were to (1) perform water quality and sediments sampling and analyses, (2) perform water quality simulation and demonstrates the model application to the Yan Shuei Gang River, (3) assess the water and sediments quality, (4) provide foci for immediate remediation efforts, (5) provide benchmark levels to test outcomes of future remediation efforts, (6) design a novel extraction technique that utilizes a mildly elevated pressure in consecutive cycles with a chelating agent for the sediment slurry.
Water quality investigation results show that the biochemical oxygen demand (BOD), ammonia-nitrogen (NH3-N), and suspended solid (SS) average concentrations in water samples of the Salt-water River varied from 10.2 to 194, 8.51 to 18.3, and 7.9 to 19.5 mg/L, respectively. The results of the chemical analysis of the Salt-water River surface sediments showed that the sediments present highly elevated Cd, Cr, Ni, Cu, Pb, Zn and Fe concentrations. Investigation results reveal that sediment samples contained significant amount of iron (up to 3.6%), Cr (up to 66.5 mg/kg), Pb (up to 36.5 mg/kg), Ni (up to 43 mg/kg), and Al (up to 1.8%). All heavy metal concentrations were higher than the world average, sediments average and sediment quality guidelines (SQGs). Although all metals showed varied concentrations, the approaches of factor analysis, normalized enrichment factor (EF), and the geo-accumulation index (Igeo) proposed in this paper were effectively used to differentiate the natural and anthropogenic sources of the metals.
Both the EF and Igeo indicated similar anthropogenic contamination degree of the metals. The potential acute toxicity in sediment of Yan Shuei Gang River was observed to be mainly due to Cu contamination. Cu was the major toxicity contributor accounting for 32-46% of the total toxicity in Salt-water River, followed by Zn.
The Water Quality Analysis Simulation Program (WASP) model developed by US Environmental Protection Agency (EPA) was selected as a water quality planning tool to perform the water quality evaluation. Modeling results show that the current daily pollutant inputs were much higher than the calculated carrying capacity for nutrients and BOD of the Yan Shuei Gang River. Based on the results from this study, the following remedial strategies have been proposed to minimize the impacts of industry and domestic source pollution on the water quality of Salt-water River: (1) increase the flow by transporting 1 m3/s unpolluted surface water from other sources to dilute the polluted river water, (2) construction of the intercepting systems to effective intercept and transport the untreated wastewater to the wastewater treatment systems.
The sediments batch extracted by 150 psi pressure cycles has the most Cu removed rater (70%), much higher than without treatment (55%) or with 90 psi pressure cycles treatment (65%). Pressure-assisted extraction achieves in 60 min the amounts of Cu equal to or exceeding those achieved in 240 min without pressure cycles under the same concentration conditions. This research indicates that the advantages of pressure cycle system are increased process speed, more thorough extraction, and reduced use of the chelating agent. The heightened treatment is explained by sediments aggregate fracturing upon pressure cycles that exposes the contaminants as well as by the chelating agents. The technique is expected to accelerate extraction treatment of a wide range of heavy metal contaminants, and it may provide treatment to dredged and stored contaminated sediments.
Experience obtained from this study will be helpful in designing the sediment and river management strategies for other similar river watersheds.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0824110-191949 |
| Date | 24 August 2010 |
| Creators | Lin, Chih-En |
| Contributors | Y.C. Huang, K.C. Yu, L.J. Tsai, M.S. Lee, P.K. Hong, M.H. Liu, C.M. Kao, C.S. Yu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0824110-191949 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0021 seconds