Anaerobic digestion of excess biological wastewater treatment sludge (WAS) from pulp mills has the potential to reduce disposal costs and to generate energy through biogas production. The organic matter in WAS is highly structured, which normally hinders biogas production. This study investigated three methods of pretreating WAS from two different pulp mills before anaerobic digestion to improve biogas yield and production rate. The three pretreatment methods tested were: i) thermal pretreatment at 170oC, ii) caustic pretreatment at 140oC and pH 12, and iii) sonication at 20 kHz and 1 W/mL. Thermal pretreatment proved to be the most effective, increasing biogas yield by 280% and 50% and increasing production rates 300-fold and 10-fold for the two samples, respectively. Caustic pretreatment showed similar results, but resulted in the formation of soluble non-biodegradable compounds. Sonication was the least effective pretreatment and did not substantially increase biogas yield, but increased biogas production rate.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/17237 |
| Date | 26 February 2009 |
| Creators | Wood, Nicholas |
| Contributors | Master, Emma, Tran, Honghi |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
| Format | 2194379 bytes, application/pdf |
Page generated in 0.0018 seconds