Wastewater recycling and reuse is an important issue in the coming years due to the increasing water demand and the decreasing water supply. MBR (membrane bioreactor) technology has become an important pretreatment technology for reclaiming treated effluent from, for example, domestic, dyestuff, and pharmaceutical wastewater plants. However, variations in wastewater flow rate and polluted materials can be a great influence to the performance of MBR. The applications of MBR to the treatment of various industrial wastewaters are worthy of further investigation.
The present study investigated performances of MBR for treating wastewaters from a tannery plant and an industrial park. In addition, a pilot-scale UASB (upflow anaerobic sludge blanket) reactor was used for the pretreatment of the tannery plant wastewater for COD (chemical oxygen demand) removal.
Results from tannery wastewater treatment indicate that using effluent from the activated sludge ponds of plant A as an influent to the pilot MBR, COD and SS (suspended solids) of the MBR filtrates could always be kept at <100 and <30 mg/L, respectively. Both COD and SS of the filtrates meet effluent regulations of <160 and <30 mg/L, respectively. The operation conditions were HRT (hydraulic retention time) = 12.2-20.4 hr, flux = 4.92-8.17 L/m2.hr, and MLSS (mixed liquor suspended solids) = 5,060-37,800 mg/L. Because the effluent had high TDS (total dissolved solids) contents of 8,700-9,700 mg/L resulted from chloride and sulfate ions, the permissible operational fluxes (4.92-8.17 L/m2.hr) were far below the normal ones (20-30 L/m2.hr). Experiments from the UASB test indicate that on an average 70% of the influent COD (2,200 mg/L) could be removed.
Wastewater plant for the industrial park had influent and effluent COD of 93-144 and 11-65 mg/L, respectively. By the MBR with EBRT of 2.16-12.2 hr, flux of 5.0-28 L/m2.hr, and MLSS of 1,550 mg/L, the filtrates had COD of 11-81 mg/L. In addition, COD of the MBR filtrates could be decreased from 77 to 20-40 mg/L after supplementation of PAC (powdered activated carbon) at a concentration of 500 mg/L, and a clearer filtrate was obtained. After 30 days of operation, COD of the filtrates could be maintained at 30-48 mg/L. Regular addition of PAC to the MBR reactor is necessary for keeping the effluent quality to meet the reuse requirements.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0823110-121515 |
| Date | 23 August 2010 |
| Creators | Huang, Ming-Ho |
| Contributors | Ming-Shean Chou, Mei-Jywan Syu, Ju-Sheng Huang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0823110-121515 |
| Rights | withheld, Copyright information available at source archive |
Page generated in 0.0021 seconds