This master’s thesis has been elaborated as a part of master’s studies of engineering technology M2I-K, major in M-STM – Engineering technology and industrial management and deals with the problem of a transition to a self-production of previously purchased distance washers. Distance washers were purchased in six different types of similar shape, each type in four different thicknesses. One of these types was chosen as a representative for this master’s thesis. We shall explore the possibilities of self-production with the emphasis on economical validation of the transition. The distance washer is a flat part, the intermediate being sheet metal. Technologies considered for manufacturing the washers correspond to the technical facilities and equipment available at the production hall of the company this project is planned for. The company possesses technology for CO2 laser cutting, cutting by CNC punching machine and cutting in the punching tool. To provide a complex overview we shall also enquire into cooperated technologies such as water jet and plasma cutting, oxy-acetyleny cutting and CNC working. All options are evaluated with regard to the production expenses and lead to a most economically plausible method of manufacturing or, if need be, give reasons for going back to purchasing the part from the current supplier.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229697 |
| Date | January 2011 |
| Creators | Dvořák, Jiří |
| Contributors | Podaný, Kamil, Císařová, Michaela |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds