Seismic full waveform inversion (waveform tomography) is a method to reconstruct the underground velocity field in high resolution using seismic data. The method was first introduced during the 1980’s and became computationally feasible during the late 1990’s when the method was implemented in the frequency domain. This work presents three case studies and one synthetic benchmark of full waveform inversion applications. Two of the case studies are focused on time-lapse cross-well and 2D reflection seismic data sets acquired at the Ketzin CO2 geological storage site. These studies are parts of the CO2SINK and CO2MAN projects. The results show that waveform tomography is more effective than traveltime tomography for the CO2 injection monitoring at the Ketzin site for the cross-well geometry. For the surface data sets we find it is difficult to recover the true value of the velocity anomaly due to the injection using the waveform inversion method, but it is possible to qualitatively locate the distribution of the injected CO2. The results agree well with expectations based upon conventional 2D CDP processing methods and more extensive 3D CDP processing methods in the area. A further investigation was done to study the feasibility and efficiency of seismic full waveform inversion for time-lapse monitoring of onshore CO2 geological storage sites using a reflection seismic geometry with synthetic data sets. The results show that waveform inversion may be a good complement to standard CDP processing when monitoring CO2 injection. The choice of method and strategy for waveform inversion is quite dependent on the goals of the time-lapse monitoring of the CO2 injection. The last case study is an application of the full waveform inversion method to two crooked profiles at the Forsmark site in eastern central Sweden. The main goal of this study was to help determine if the observed reflections are mainly due to fluid filled fracture zones or mafic sills. One main difficulty here is that the profiles have a crooked line geometry which corresponds to 3D seismic geometry, but a 2D based inversion method is being used. This is partly handled by a 3D to 2D coordinate projection method from traveltime inversion. The results show that these reflections are primarily due to zones of lower velocity, consistent with them being generated at water filled fracture zones.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-187142 |
| Date | January 2013 |
| Creators | Zhang, Fengjiao |
| Publisher | Uppsala universitet, Geofysik, Uppsala |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, 1651-6214 ; 1005 |
Page generated in 0.0021 seconds