Electrical discharge wire machining, which represents non-conventional machining technology is up on very high technological level. However, due to this type of machining many of defects are set on the material and the quality of machined surface is changed according to set parameters of machine. Complex study was created with the aim of optimization these parameters according to final quality of surface and right wire speed. This study include experiment with 33 samples, every of these samples was machined with different parameters, results of these machining were analyzed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417071 |
| Date | January 2020 |
| Creators | Vontor, Jakub |
| Contributors | Osička, Karel, Mouralová, Kateřina |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds