Inhomogeneous and changing temperature distributions in machine tools lead to sometimes considerable quality problems in the manufacturing process. In addition, the switching on and off of aggregates, for example, leads to further fluctuations in the temperature field of machine tools. More than 100 specialists discussed these and other topics from the field of thermal research at the 1st Conference on Termal Issues in Machine Tools in Dresden from 22 to 23 March.:Efficient modelling and computation of structure-variable thermal behavior of machine tools
S. Schroeder, A. Galant, B. Kauschinger, M. Beitelschmidt
Parameter identification software for various thermal model types
B. Hensel, S. Schroeder, K. Kabitzsch
Minimising thermal error issues on turning centre
M. Mareš, O. Horejš, J. Hornych
The methods for controlled thermal deformations in machine tools
A. P. Kuznetsov, H.-J. Koriath, A.O. Dorozhko
Efficient FE-modelling of the thermo-elastic behaviour of a machine tool slide in lightweight design
C. Peukert, J. Müller, M. Merx, A. Galant, A. Fickert, B. Zhou, S. Städtler, S. Ihlenfeldt, M. Beitelschmidt
Development of a dynamic model for simulation of a thermoelectric self-cooling system for linear direct drives in machine tools
E. Uhlmann, L. Prasol, S.Thom, S. Salein, R. Wiese
System modelling and control concepts of different cooling system structures for machine tools
J. Popken, L. Shabi, J. Weber, J. Weber
The electric drive as a thermo-energetic black box
S. Winkler, R. Werner
Thermal error compensation on linear direct drive based on latent heat storage
I. Voigt, S. Winkler, R. Werner, A. Bucht, W.-G. Drossel
Industrial relevance and causes of thermal issues in machine tools
M. Putz, C. Richter, J. Regel, M. Bräunig
Clustering by optimal subsets to describe environment interdependencies
J. Glänzel, R. Unger, S. Ihlenfeldt
Using meta models for enclosures in machine tools
F. Pavliček, D. P. Pamies, J. Mayr, S. Züst, P. Blaser, P. Hernández-Becerro, K. Wegener
Model order reduction of thermal models of machine tools with varying boundary conditions
P. Hernández-Becerro, J. Mayr, P. Blaser, F. Pavliček, K. Wegener
Effectiveness of modelling the thermal behaviour of the ball screw unit with moving heat sources taken into account
J. Jedrzejewski, Z. Kowal, W. Kwasny, Z. Winiarski
Analyzing and optimizing the fluidic tempering of machine tool frames
A. Hellmich, J. Glänzel, A. Pierer
Thermo-mechanical interactions in hot stamping
L. Penter, N. Pierschel
Experimental analysis of the heat flux into the grinding tool in creep feed grinding with CBN abrasives
C. Wrobel, D. Trauth, P. Mattfeld, F. Klocke
Development of multidimensional characteristic diagrams for the real-time correction of thermally caused TCP-displacements in precise machining
M. Putz, C. Oppermann, M. Bräunig
Measurement of near cutting edge temperatures in the single point diamond turning process
E. Uhlmann, D. Oberschmidt, S. Frenzel, J. Polte
Investigation of heat flows during the milling processes through infrared thermography and inverse modelling
T. Helmig, T. Augspurger, Y. Frekers, B. Döbbeler, F. Klocke, R. Kneer
Thermally induced displacements of machine tool structure, tool and workpiece due to cutting processes
O. Horejš, M. Mareš, J. Hornych
A new calibration approach for a grey-box model for thermal
error compensation of a C-Axis
C. Brecher, R. Spierling, M. Fey
Investigation of passive torque of oil-air lubricated angular contact ball bearing and its modelling
J. Kekula, M. Sulitka, P. Kolář, P. Kohút, J. Shim, C. H. Park, J. Hwang
Cooling strategy for motorized spindle based on energy and power criterion to reduce thermal errors
S. Grama, A. N. Badhe, A. Mathur
Cooling potential of heat pipes and heat exchangers within a machine tool spindleo
B. Denkena, B. Bergman, H. Klemme, D. Dahlmann
Structure model based correction of machine tools
X. Thiem, B. Kauschinger, S. Ihlenfeldt
Optimal temperature probe location for the compensation of transient thermal errors
G. Aguirre, J. Cilla, J. Otaegi, H. Urreta
Adaptive learning control for thermal error compensation on 5-axis machine tools with sudden boundary condition changes
P. Blaser, J. Mayr, F. Pavliček, P. Hernández-Becerro, K. Wegener
Hybrid correction of thermal errors using temperature and deformation sensors
C. Naumann, C. Brecher, C. Baum, F. Tzanetos, S. Ihlenfeldt, M. Putz
Optimal sensor placement based on model order reduction
P. Benner, R. Herzog, N. Lang, I. Riedel, J. Saak
Workpiece temperature measurement and stabilization prior to dimensional measurement
N. S. Mian, S. Fletcher, A. P. Longstaff
Measurement of test pieces for thermal induced displacements on milling machines
H. Höfer, H. Wiemer
Model reduction for thermally induced deformation compensation of metrology frames
J. v. d. Boom
Local heat transfer measurement
A. Kuntze, S. Odenbach, W. Uffrecht
Thermal error compensation of 5-axis machine tools using a staggered modelling approach
J. Mayr, T. Tiberini. P. Blaser, K. Wegener
Design of a Photogrammetric Measurement System for Displacement and Deformation on Machine Tools
M. Riedel, J. Deutsch, J. Müller. S. Ihlenfeldt
Thermography on Machine Tools
M. Riedel, J. Deutsch, J. Müller, S. Ihlenfeldt
Test piece for thermal investigations of 5-axis machine tolls by on-machine measurement
M. Wiesener. P. Blaser, S. Böhl, J. Mayr, K. Wegener
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:32644 |
| Date | 08 January 2019 |
| Creators | Ihlenfeldt, Steffen, Brecher, Christian, Putz, Matthias, Billington, David |
| Contributors | Technische Universität Dresden |
| Publisher | Verlag Wissenschaftliche Scripten |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/updatedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Collection |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 978-3-95735-085-5 |
Page generated in 0.0023 seconds