ZnO material based hetero-junctions are a potential candidate for the design andrealization of intrinsic white light emitting devices (WLEDs) due to several advantages overthe nitride based material system. During the last few years the lack of a reliable andreproducible p-type doping in ZnO material with sufficiently high conductivity and carrierconcentration has initiated an alternative approach to grow n-ZnO nanorods (NRs) on other ptypeinorganic and organic substrates. This thesis deals with ZnO NRs-hetero-junctions basedintrinsic WLEDs grown on p-SiC, n-SiC and p-type polymers. The NRs were grown by thelow temperature aqueous chemical growth (ACG) and the high temperature vapor liquid solid(VLS) method. The structural, electrical and optical properties of these WLEDs wereinvestigated and analyzed by means of scanning electron microscope (SEM), current voltage(I-V), photoluminescence (PL), cathodoluminescence (CL), electroluminescence (EL) anddeep level transient spectroscopy (DLTS). Room temperature (RT) PL spectra of ZnOtypically exhibit one sharp UV peak and possibly one or two broad deep level emissions(DLE) due to deep level defects in the bandgap. For obtaining detailed information about thephysical origin, growth dependence of optically active defects and their spatial distribution,especially to study the re-absorption of the UV in hetero-junction WLEDs structure depthresolved CL spectroscopy, is performed. At room temperature the CL intensity of the DLEband is increased with the increase of the electron beam penetration depth due to the increaseof the defect concentration at the ZnO NRs/substrate interface. The intensity ratio of the DLEto the UV emission, which is very useful in exploring the origin of the deep level emissionand the distribution of the recombination centers, is monitored. It was found that the deepcenters are distributed exponentially along the ZnO NRs and that there are more deep defectsat the root of ZnO NRs compared to the upper part. The RT-EL spectra of WLEDs illustrateemission band covering the whole visible range from 420 nm and up to 800 nm. The whitelightcomponents are distinguished using a Gaussian function and the components were foundto be violet, blue, green, orange and red emission lines. The origin of these emission lines wasfurther identified. Color coordinates measurement of the WLEDs reveals that the emitted lighthas a white impression. The color rendering index (CRI) and the correlated color temperature(CCT) of the fabricated WLEDs were calculated to be 80-92 and 3300-4200 K, respectively.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-71829 |
| Date | January 2011 |
| Creators | Bano, Nargis |
| Publisher | Linköpings universitet, Fysik och elektroteknik, Linköpings universitet, Tekniska högskolan, Linköping : Linköping University Electronic Press |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Linköping Studies in Science and Technology. Dissertations, 0345-7524 ; 1401 |
Page generated in 0.0014 seconds