Knowledge of the end winding inductance of electrical machines is decisive for calculating their operating performance. In this article, two different approaches to analytically calculate the stator end winding inductance of large induction machines are discussed. The first method is based on the exact replication of the 3D conductor geometry using serially connected straight filaments, where the inductances are calculated by solving Neumann’s integral. In the second method, the end winding flux is resolved into components excited by the axial and circumferential end winding magnetomotive force, resulting in a far simpler geometrical model. In both cases, end face effects are taken into account by adopting the method of images. The analytical approaches are compared to the known analytical calculation method proposed by Alger [1]. In addition, the stator end winding inductance is computed by means of 3D finite-element analysis. Using experimental validation, it is shown that both the analytical and numerical results reasonably correlate with removed rotor inductance measurements taken for several induction machines with different rated powers and frame sizes, if the permeability of the laminated core is taken into consideration.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:87286 |
| Date | 05 October 2023 |
| Creators | Schuhmann, Thomas, Conradi, Alexander, Deeg, Christian, Brandl, Konrad |
| Publisher | Taylor & Francis |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/acceptedVersion, doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 1532-5016, https://doi.org/10.1080/15325008.2013.821690 |
Page generated in 0.0013 seconds