Return to search

Návrh robotického pracoviště pro automatické zakládání termostatických hlavic / Design of robotic workstation for automated insertion of thermostatic heads

The objective of this master thesis is to design a robotic work cell for automated insertion of thermostatic heads. The proposed design was based on the comprehensive analysis of the current workplace. By taking the demands of the company and customer into consideration, several possibilities of the robotic work cell design were proposed, from which the most suitable one was chosen and carefully elaborated. During the process of designing, several safety standards had to be taken into consideration in order to mitigate risks. For that purpose, a risk analysis was conducted as well. Using the Siemens Process Simulate software, the proposed robotic work cell concept was verified, including cycle time analysis. The last part of the thesis is an assessment of the initial expenditures of the robotic work cell equipment, as well as the return of the investment calculation. Drawing of the robotic work cell layout is attached to the thesis.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401005
Date January 2019
CreatorsKubovčík, Peter
ContributorsKočiš, Petr, Knoflíček, Radek
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0023 seconds