The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. By evaluating the weight of the required properties and their degree of fulfillment, a variant of the design solution of the table is selected, which is then designed. The individual design steps are described and explained in the text part of the work accompanied by pictures and calculations. The result of the process is a structural design of the mechanical part of the rotary table with a 3D model and partially processed drawing documentation. The contribution of the work is the summarization of relevant information for the design of rotary tables, the processed procedure of solving the design of the table and the modeled design of the rotary table. These outputs can be further treated as documentation for the production of the designed table, the development of the rotary table design to deeper details or technical development in this area.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443716 |
Date | January 2021 |
Creators | Bezděk, Petr |
Contributors | Marek, Jiří, Hermanský, Dominik |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.012 seconds