Machined fragments of 10 core plugs from oshore reservoirs have been analysed using a high resolution X-ray micro-computed tomography (micro-CT) facility. The facility includes a system capable of acquiring 3D images made up of 20003 voxels on core plugs up to 6 cm diameter with resolutions down to 2 um. The cores analysed include six cores from a gas reservoir and four cores from an oil reservoir. The cores exhibit a very broad range of pore and grain sizes, porosity, permeability and mineralogy. The petrological data, available only for gas reservoir cores, is compared with the data obtained from the tomographic images. Computational results made directly on the digitized tomographic images are presented for the permeability, formation factor, resistivity index and drainage capillary pressure across a range of . We show that data over a range of porosity can be computed from a single fragment. We compare the computations of petrophysical data on fragments to conventional laboratory measurements on the full plug. Permeability predictions from digital and conventional core analysis are consistent. It is shown that a characteristic length scale can be dened as a quality control parameter for the estimation of permeability. Results for formation factor, drainage capillary pressure and resistivity index are encouraging. The results demonstrate the potential to predict petrophysical properties from core material not suited for laboratory testing (e.g., sidewall or damaged core and drill cuttings) and the feasibility of combining digitized images with numerical calculations to predict properties and derive correlations for specic rock lithologies. The small sample size required for analysis makes it possible to produce multiple measurements on a single plug. This represents a potential multiplier on the quantity of core data allowing meaningful distributions or spreads in petrophysical properties to be estimated. We discuss the current limitations of the methodology and suggest improvements; in particular the need to calibrate the simulated data to parallel laboratory core measurements. We also describe the potential to extend the methodology to a wider range of petrophysical properties. This development could lead to a more systematic study of the assumptions, interpretations and analysis methods commonly applied within industry and lead to better correlations between petrophysical properties and log measurements.
| Identifer | oai:union.ndltd.org:ADTP/242126 |
| Date | January 2005 |
| Creators | Ghous, Abid, Petroleum Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Petroleum Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Abid Ghous, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0021 seconds