This study aimed to evaluate the physical and mechanical properties of red oak (Quercus spp.), white oak (Quercus spp.), hard maple (Acer saccharum) and yellow-poplar (Liriodendron tulipifera) and compare them to values from past publications. Mechanical testing was conducted on small, clear, defectree specimens from red oak, white oak, hard maple and yellow-poplar following the standard ASTM D143. Percentage of latewood, moisture content, specific gravity, modulus of elasticity (MOE), modulus of rupture (MOR), compression parallel and perpendicular to the grain and Janka hardness were determined. Results indicated that mechanical properties for red oak, white oak, hard maple and yellow poplar have not changed substantially because the average values remain in a range that is very close to the ones published in past studies. Thus, values from the Wood Handbook can still be used for engineering purposes.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-4661 |
| Date | 01 May 2020 |
| Creators | Carmona Uzcategui, Marly Gabriela |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0021 seconds