Cold metal forming processes have been widely used for manufacturing of their high production rates and increased yield strength after forming process. For the use in service, increased yield strength of the cold-formed products should be known. The new yield strength can be found by several methods. Mechanical tests such as compression or tensile test are direct methods to obtain new yield strength if the product shape is appropriate. Finite element simulations may be another way to get accurate results for new yield strength distribution. Also Vickers hardness number can be used for prediction of yield strengths by available conversion models. The aim of this study is to compare the results of all these methods. During the study two different materials (austenitic stainless steel and carbon steel) cold formed by drawing and extrusion are investigated. FE simulations have been conducted to predict product properties. For this purpose flow curves obtained from compression and tensile tests are used in FE-models based on elasto-plastic, isotropic hardening material. Results show that both materials are highly anisotropic and have much lower yield strength values than found in simulations. Similarly none of the models correlating Vickers hardness numbers and yield strengths are successful since they are designed for an isotropic hardening material. This study basically presents the deviation of a real material behavior from isotropic material behavior.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/4/1095512/index.pdf |
| Date | 01 January 2003 |
| Creators | Kocaker, Bahadir Mustafa |
| Contributors | Tekkaya, Erman A. |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0021 seconds