This thesis deals with proposal of assembly line modification for production of electromagnetically controlled pneumatic valves. The beginning of this thesis is dedicated to the theoretical study the most common Poka-Yoke systems, which are used for mistake avoiding in assembly process. There is described analytical analysis FMEA, which is used for detection of weak place in process. The next chapter is focused on description of valves manufactured on this assembly line. Main part of thesis is dedicated to proposal for process modification and design solution with choosing of appropriate sensors for some operations. There are created documents as a flow-chart for control algorithm, FMEA and process flow-chart for proposal according to automotive standard and estimated budget with counted payback period for whole project in last part.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230566 |
Date | January 2013 |
Creators | Palacka, Martin |
Contributors | Ripel, Tomáš, Krejsa, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds