This master thesis deals with the measurement properties of ultrasound probes. Ultrasound probes and their parameters significantly affect the quality of the final image. Values of pa-rameters of the probes may change due to their use, because probes may be damaged and the final image may no longer be correct. For these reasons the measurements of parameters of probes are very important. In this master thesis there are described and implemented the possibility of measuring the spatial resolution, focal zone, the sensitivity of the probe and measuring the length of the dead zone. Two ultrasonic phantoms were used for measuring. In the practical part there was created the program called Mereni_parametru, which allows to determine the value of four parameters from captured images of the phantom. Further, there are listed and described measured values for five ultrasonic probes. Results for two of these probes are then compared with the parameters given by the manufacturers.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:221368 |
| Date | January 2015 |
| Creators | Rusina, Michal |
| Contributors | Mézl, Martin, Harabiš, Vratislav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds