Return to search

Využití inovativních sorbentů při imobilizaci Zn v půdě / The use of inovative sorbents for immobilization of Zn in soil

Amorphous manganese oxide has been already successfully tested as an efficient amendment for limiting the mobile fraction of risk elements in soil. However, its application is accompanied with an unsolicited phenomenon of increased dissolution of this agent related to oxidation of soil organic matter. For that reason, surface modification of the studied Mn oxide with the layer of MnCO3 has been proposed (Sm-AMO). The subject of this thesis is to assess the effectiveness of chemical stabilization of two contaminated soils using Sm-AMO with a focus on Zn and to verify the stability Sm-AMO based on laboratory experiments. The results of preliminary stability testing of both materials in demineralized water confirmed that Sm-AMO is less soluble than the original AMO. However, this fact was not confirmed by the results of testing of AMO and Sm-AMO performed using pH-static leaching experiments, when no differences were observed between AMO and Sm-AMO stability based statistical analysis, except for the natural pH (6.03) in the Litavka soil (soil L). Both sorbents yielded greater stability with increasing pH. Adsorption kinetics of Pb, Zn, Cd and As, which are present in the tested soils, onto AMO and Sm-AMO was studied to compare the adsorption properties of both materials. Affinity of these metals was generally higher towards AMO, but the recorded equilibrium time was similar for both sorbents. The results of adsorption kinetics for both materials tested showed the highest sorption rate and the highest adsorbed amount for Pb and the lowest for Zn. Similar results were also observed at pH-static leaching experiment. Stabilization effectiveness of Sm-AMO compared to AMO was mainly demonstrated for Pb and As under natural pH conditions (pH 6,03 and 6,43) of Litavka and Smolotely soils. Considering the stabilization of Zn statistically significant stabilizing effect of AMO/Sm-AMO was observed only at pH 8, when the AMO showed to be more effective. The effectiveness of Sm-AMO for the immobilization of Zn was not as significant as expected, but compared with other immobilization amendments Sm-AMO is an effective sorbent for Zn stabilization.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:257657
CreatorsŘečínská, Magdalena
ContributorsVítková, Martina, Zdeňka, Zdeňka
PublisherČeská zemědělská univerzita v Praze
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0147 seconds