Return to search

Manufacture and properties of prepacked aggregate concrete

The properties of prepacked concrete have long been studied and compared with those of normal concrete, although very little is known about its strength and deformation behaviour. Either by experiment or theory these aspects have been described in different ways. This thesis describes some experimental programmes on prepacked concrete that include its manufacture and a study of its strength, deformation and failure mechanism. To compare these aspects, normal concretes having the same water-cement and aggregate-cement ratios were made and tested under the same condition. The experimental work investigates the use of different types of admixture in grout in order to improve the strength of prepacked concrete. Among them the expanding admixture was found to be most suitable. Data are presented on some properties of grout using different types of admixture at various sand-cement ratios. Along with the strength investigation, investigation on modulus of elasticity, creep and shrinkage were also carried out. Tests of creep and shrinkage reveal that the magnitudes of both in prepacked concrete were much lower than in normal concrete. Different aspects of the failure mechanism of prepacked concrete are also presented and discussed.

Identiferoai:union.ndltd.org:ADTP/245718
Date January 1984
CreatorsAbdul Awal, A. S. M.
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsTerms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access

Page generated in 0.0014 seconds