Return to search

Biodegradation, surface rugosities and biofilm coverage of biopolymers

The increasing concern for sustainability and progress of medical research has resulted in the emergence of a wide range of biopolymers. The biodegradability of these alternative biopolymers requires investigation prior to their application in environmental and medical systems. This Thesis describes biodegradation of poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(HB-co-HV)), poly(3- hydroxyoctanoate) (PHO), poly-DL-lactide (PDLL), poly-DL-lactide-co-glycolide (PDLLG) and ethyl cellulose (EC). Polymers were buried in garden soil for in vivo biodegradation experiments and a mixed population of microbes from the soil were incubated in laboratory in vitro biodegradation experiments. In both systems the short chain length PHA???s degraded rapidly and the medium chain length PHAs and other biomaterials displayed either slow or negligible weight loss. PHB and P(HB-co-HV) copolymers degraded to T50 6.7 to 9.7 times faster in vitro than in vivo. After 380 days burial in soil PHO had lost 60 % of the original 20 mg weight, PDLL 28 % and PDLLG 35 %. Ethyl cellulose and polystyrene did not biodegrade, Polymer-microbe surface interactions were investigated. The faster degrading polymers PHB and P(HB-co-HV) attracted a higher coverage of biofilm than the slower degrading polymers PHO, PDLL and PDLLG for both the in vitro and in vivo experiments. The non-degradable polymers (EC and polystyrene) attracted no biofilm. In vitro and in vivo experiments demonstrated a positive correlation between biofilm coverage and polymer weight loss. Additionally the rougher air sides of solvent cast films attracted more biofilm than the smoother dish sides. Polymer surface changes were quantified with microscopy. Surface roughness of PHB, P(HB-co-8HV) and PHO increased during biodegradation, primarily due to an increase in the waviness component for both in vitro and in vivo degradation. In vitro methods provided a rapid mechanism for protocol development and sufficiently predicted both surface roughness changes and biofilm-biodegradation relationships in vivo. PHB and P(HB-co-8HV) were blended with the biodegradable antifouling agent 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one (DCOI or Sea Nine 211). DCOI leached slowly from the films into the soil delaying biodegradation of the films until a lower residual level of DCOI remained. Biofouling was reduced on PHA films containing DCOI.

Identiferoai:union.ndltd.org:ADTP/257467
Date January 2006
CreatorsWoolnough, Catherine Anne, School of Biotechnology & Biomolecular Science, UNSW
PublisherAwarded by:University of New South Wales. School of Biotechnology and Biomolecular Science
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsCopyright Catherine Anne Woolnough, http://unsworks.unsw.edu.au/copyright

Page generated in 0.0019 seconds