This thesis explores the seismic analysis and design of post-tensioning concrete masonry (PCM) walls. Using unbonded post-tensioning, walls are vertically prestressed by means of strands or bars which are passed through vertical ducts inside the walls. As the walls are subjected to lateral displacements (in-plane loading), gaps form at the horizontal joints, reducing the system stiffness. As long as the prestressing strands are kept within the elastic limit, or at least maintain a considerable amount of the initial prestressing force, they can provide a restoring force, which will return the walls to their original alignment upon unloading. The key feature in this behaviour is attributable to the tendons being unbonded over the entire wall height, allowing for distribution of tendon strain over the entire length of the tendon. An extensive literature review found that post-tensioning of masonry has had limited application in seismic areas and that there currently are no specific code requirements for it’s use for ductile seismic design, largely as a consequence of little knowledge about the ductility capacity and energy dissipation characteristics. It was concluded that structural testing of PCM walls and concrete masonry creep and shrinkage testing were essential to advance the understanding of this construction type. Creep and shrinkage experiments confirmed that long term prestress losses are considerable in both grouted and ungrouted concrete masonry, and must be taken into account in design. It was concluded that it is essential to use high strength steel for prestressing of PCM in order to reduce long term losses. Structural testing confirmed that fully grouted unbonded post-tensioned concrete masonry is a competent material combination for ductile structural wall systems. In particular, PCM walls strengthened in the flexural compression zones with confining plates are expected to successfully withstand severe ground shaking from an earthquake. It was suggested that partially and ungrouted PCM walls may suitably be used in strength design (non-ductile). The proposed prediction method for wall in-plane behaviour was validated by experimental results. Good correlation between predictions and results was found. Displacement spectra were developed for ductile seismic design of PCM walls. These can be used to accurately estimate the displacement demand imposed on multi-storey PCM cantilever walls.
| Identifer | oai:union.ndltd.org:ADTP/275590 |
| Date | January 2002 |
| Creators | Laursen, Peter (Peter Thorup) |
| Publisher | ResearchSpace@Auckland |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated., http://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm, Copyright: The author |
Page generated in 0.0018 seconds