Return to search

Quantifying Volatile Fatty Acid Concentrations During the Pretreatment and Anaerobic Digestion Process

Producing renewable energy from biomass or from the wastewater treatment process has gained momentum in the past 20 years. Anaerobic digestion has historically been used as one step in the waste treatment process, to both reduce the mass of waste that needs to be disposed of and to generate biogas. This process is typically only able to reduce 30-40% of the waste mass because of the recalcitrant nature of the waste streams being treated. Anaerobic pretreatment with the thermophilic bacteria Caldicellulosiruptor bescii (C. bescii) has been proven to increase the percentage of mass digested and consequently increase methane production to 75%-85%. However, even with the use of pretreatment with C. bescii, it still leaves 15%-25% of the methane potential wasted. In anaerobic digestion, volatile fatty acids (VFAs) are of interest because they are the precursors to the production of methane. By using HPLC-UV-vis techniques, VFAs can be speciated and quantified in as little as 12-minutes. Depending on the pretreatment system, operational procedures for both the pretreatment and anaerobic digestion system, and substrate, the type and composition of VFAs can vary. For example, in several experiments analyzed it was found that valeric acid is a VFA that is dominate in waste activate sludge treatments, while acetic acid is in higher proportions with manure substrates. Besides methane production, VFA monitoring can detect issues with a bioreactor performance. By tracking VFA trends, the health of the system can be assessed.

Identiferoai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-10785
Date15 December 2022
CreatorsBoutelle, Sascha
PublisherBYU ScholarsArchive
Source SetsBrigham Young University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations
Rightshttps://lib.byu.edu/about/copyright/

Page generated in 0.0021 seconds