Previous work has shown that active noise control (ANC) can be applied to axial cooling fans. Optimization of the control source and error sensor placement is desired to maximize the attenuation using ANC. A genetic algorithm was developed to find the optimal placement of control sources for a given primary source. The optimal configuration of control sources around a single primary source was shown to be a linear arrangement of the sources. This holds true for both two-dimensional as well as three-dimensional configurations. The higher-order radiation of the linear arrangement has also been verified experimentally, but the improvement in the experimental apparatus was not as dramatic as the theoretical model. Multiple flow visualization techniques have been used to find optimal near field error sensor locations. When there is little obstruction to the flow field of the fan, minimal airflow is found along the near field null that is created by minimizing the sound power of the system. Surface mounting of the error sensors can lead to a small increase in the signal-to-noise ratio of the error sensors if vortices exist in the near field of the fan due to obstructions in the main flow. It has also been shown that the introduction of the ANC system does not affect the flow field of the fan.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-2168 |
| Date | 28 August 2007 |
| Creators | Duke, Connor Raymond |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.002 seconds