The use of light-weight building materials in modern construction has resulted in efficient designs and considerable cost savings by reducing structural weight and supporting sections. This has only been possible because of many years of research to better understand the properties of the light-weight material, and its structural behaviors. However, light-weight grout is a relatively new building material in reinforced masonry construction and little is known about its structural properties. The main objective of this study was to determine if the use of light-weight grout would impact the performance of reinforcing steel, specifically development length, in masonry construction.The research included testing masonry wallettes made with normal and light-weight grout containing No. 4 (12 mm) bars with splice lengths as prescribed by the current design equation as well as splices with a modification factor. The modification factor was based on preliminary grout testing, using the procedure given in the concrete building code. The wallettes were tested in a tension test to determine if the splices were of sufficient length to fully develop the yield stress of the reinforcement.For small bar sizes, No. 4 or smaller, it is not necessary to include a modification factor when calculating development length. The minimum length of lap of 12 in. governs when No. 4 or smaller bars are used, and provides sufficient length to fully develop the yield stress of the reinforcement both for normal and light-weight grout types.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-6660 |
| Date | 01 December 2015 |
| Creators | Corbett, Brandon Richard |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0019 seconds