Yes / Geopolymer concrete is a promising candidate to replace conventional concrete as geopolymer concrete depends on alkali-activated binders instead of Portland cement. The elimination of cement from the mixture results in the reduction of the greenhouse gas release. From the literature, it is known that the micro-scale characteristics of the geopolymer concrete are similar to its counterparts. However, the structural performance of geopolymer elements should be investigated in detail. Therefore, in this study, the structural performance of reinforced geopolymer concrete beams is compared by conducting bending tests to determine the shear behavior of new generation geopolymer concrete produced from entirely construction and demolition wastes (CDW). In these tests, geopolymer concrete with recycled aggregates, geopolymer concrete with natural aggregates, conventional concrete with recycled aggregates, and conventional concrete with natural aggregates are used in order to study the possibility of reaching fully-recycled construction materials. Three different shear-span-to-depth ratios (a/d) are utilized to investigate the different modes of failure. Therefore, the structural performance of beams was, firstly, compared for mixtures without recycled aggregates to control the possible side effects of 100% recycled concrete construction. Load-deflection curves, moment-curvature curves, and crack patterns were utilized to conclude the performance of geopolymer concrete. Test results revealed that geopolymer concrete beams exhibited similar performance to the conventional concrete beams of the same grade. However, the inclusion of recycled aggregates caused a shift in the failure mechanism from shear-dominated to flexure-dominated, especially in specimens with larger a/d ratios. Finally, the capacity prediction performance of current codes, i.e., TS500 and ACI318, are also examined, and the calculations resulted that the current code equations have a percentage error of approximately 55% on average, although TS500 equations performed slightly better. / The authors gratefully acknowledge the financial assistance of the Scientific and Technical Research Council (TUBITAK) of Turkey and the British Council provided under projects: 218M102 and European Union’s Horizon 2020 research and innovation programme under grant agreement No: 869336, ICEBERG (Innovative Circular Economy Based solutions demonstrating the Efficient recovery of valuable material Resources from the Generation of representative End-of-Life building material).
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19209 |
| Date | 25 October 2022 |
| Creators | Aldemir, A., Akduman, S., Ucak, S., Rafet, A., Sahmaran, M., Yildirim, Gurkan, Almahmood, Hanady A.A., Ashour, Ashraf |
| Publisher | Elsevier |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | © 2021 Elsevier. Reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license., CC-BY-NC-ND |
Page generated in 0.0016 seconds