Return to search

On the hydro-mechanical behavior of ancient railway flatforms in term of reinforcement by soil-mixing

The present work deals with the behavior of ancient railway sub-structure in France. A statistical study was firstly undertaken on problems occurred in the whole ancient French railway network. The analysis evidenced the particular importance of sub-grade quality for the performance of the sub-structure and the track geometry. Afterwards, an ancient railway line in the West of France was investigated. The analysis showed that the degradation speed of this line was correlated with different parameters such as the nature of sub-grades and the thickness of different layers. An increase trend of degradation speed with the increase in interlayer thickness was identified. The interlayer has a positive impact since it reduces the train-induced stress applied to the sub-grade. The hydro-mechanical behavior of interlayer soil under different conditions (water content, fines content, stress, number of cycles) was investigated. A set of triaxial tests and infiltration tests were performed for this purpose. By analyzing the shear strength properties, the permanent axial strain and the resilient modulus of interlayer soil, we found that the water content and the fines content must be considered together. Adding more fines into the interlayer presents a positive impact under unsaturated conditions thanks to the suction effect, but a negative impact under saturated conditions. The infiltration column tests with drying/wetting cycles showed that the hydraulic conductivity of interlayer soil is governed by fines fraction but did not change significantly with fines content. In order to study the mechanism of interlayer creation and mud pumping, a physical model of 550 mm inner diameter was developed. Soil samples representing the ancient French railway substructure with a ballast layer overlying an artificial silt layer (mixture of crushed sand and kaolin were tested. The effects of monotonic and cyclic loadings, water content and dry unit mass of sub-soil were investigated. It was found that the pore water pressure developed in the sub-soil and the sub-soil stiffness are the key factors for the migration of fine particles or the creation of interlayer/mud pumping. Water is the necessary condition, but it is the soil compressibility that governs the phenomenon to occur

Identiferoai:union.ndltd.org:CCSD/oai:pastel.archives-ouvertes.fr:pastel-00945680
Date25 November 2013
CreatorsDuong, Trong Vinh, Duong, Trong Vinh
PublisherUniversité Paris-Est
Source SetsCCSD theses-EN-ligne, France
LanguageEnglish
Detected LanguageEnglish
TypePhD thesis

Page generated in 0.1805 seconds