The analysis of pile behavior is a complex problem due to the diversity of the phenomena governing the soil behavior and particularly that of the neighboring soil. The objective of this work was to develop a valid modeling tool to evaluate piles' behavior under axial loads by developing a pertinent mechanical model supported in a robust finite element program which would successfully reproduce the soil behaviour under extreme monotonic and cyclic shear strain. This is done to allow for the numerical modelling of the installation procedure of pile foundations and continued loading of high amplitude cyclic paths. In order to model the installation phase of a monotonic, jacked or dynamic pile foundation some issues must be addressed. Finite deformations take place whilst the pile is put in place requiring an adjustment in the mechanical formulation of the model at the interface level to take into account that the small deformations (rotations and strain) hypothesis is no longer valid. Moreover, the constitutive model must take into account the physical behaviour of the soil when subjected to high order of magnitude displacements. This includes the phenomenon of grain breakage, also referred to as particle crushing, which greatly influences the volumetric behaviour of soil as thus reflecting of shear stress mobilization. The elastoplastic ECP model has therefore been enhanced by introducing an internal variable taking into account the breakage mechanism. The thermodynamic admissibility criteria are verified for the original and revised constitutive models. Both monotonic and pseudo-dynamic installation procedures were numerically simulated and the results thoroughly analysed. Finally, the cyclic shear resistance degradation at the pile shaft is a commonly occurring phenomenon during continued cyclic loading of pile foundation (friction fatigue). The constitutive modelling of this phenomenon, however, is not a straightforward matter. The stress path followed by the thin layer at the soil-pile interface level is known to be directly related to the volumetric behaviour due to the boundary conditions of the problem. A comprehensive analysis of all the components of the behaviour of soil during this stage was object of study in this work.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-01000298 |
| Date | 12 February 2014 |
| Creators | Berenguer Todo-Bom, Luis André |
| Publisher | Ecole Centrale Paris |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0021 seconds