Premixed and partially-premixed combustion and ollutant emissions in full-scale gas turbines has
been numerically investigated using a massively-parallel Large-Eddy Simulation Combustion Dynamics Model.
Through the use of a flamelet library approach, it was observed that CO (Carbon Oxide) and NO (Nitric Oxide) emission can be predicted and match experimental results. The prediction of the CO emission trend is shown to be possible if the influence of the formation of UHC (Unburnt HydroCarbons) via flame extinction is taken into account. Simulations were repeated with two different combustion approach: the G-equation model and the Linear-Eddy Mixing (LEM) Model. Results are similar for these two sets of numerical simulations.
The LEM model was used to simulate flame extinction and flame lift-off in a dump combustion chamber. The LEM model is compared to the G-equation model and it was found that the
LEM model is more versatile than the G-equation model with regard to accurate simulation of flame propagation in all turbulent premixed combustion regimes. With the addition of heat losses, flame extinction was observed for low equivalence ratio. Numerical simulation of flame
propagation with transient inflow conditions were also carried
out and demonstrated the ability of the LEM model to
accurately simulate flame propagation in the case
of a partially-premixed system.
In all simulations where flame extinction and
flame lift-off was simulated, release of unburnt fuel
in the post-flame region through flame extinction was not observed.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/7161 |
| Date | 13 July 2005 |
| Creators | Eggenspieler, Gilles |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Dissertation |
| Format | 4998101 bytes, application/pdf |
Page generated in 0.0021 seconds