Return to search

Casca de pinhão in natura e carvão ativo: adsorventes para remoção de corantes em efluentes aquosos

Este trabalho foi conduzido no sentido de verificar a eficiência de remoção de corantes têxteis por meio do processo de adsorção em batelada utilizando adsorventes preparados a partir da casca do pinhão, pseudofruto da árvore Araucaria angustifólia. Os materiais foram obtidos por carbonização com ácido e ativação química e física da casca de pinhão, um resíduo alimentar que comumente é desprezado. A casca de pinhão in natura (PW), o material carbonizado (C‐PW) e os carvões ativados (CAC e AC‐PW/CPAC) foram empregados na remoção de corantes têxteis de solução aquosa. Durante as etapas de ativação foram ajustados o fluxo de gás de arraste no reator, a taxa de aquecimento e a temperatura final, a fim de se obter carvões ativados com elevada área superficial específica e alta capacidade de adsorção. O processo de carbonização e a ativação conferiram aos materiais uma área superficial específica superior à do material de partida, PW. Para a adsorção dos corantes laranja reativo, vermelho de prociona e verde brilhante foram necessários diferentes tempos de equilíbrio dependendo do adsorvente utilizado. Os carvões ativos foram os materiais que adsorveram o maior percentual de corante em menor tempo de contato. Os modelos de isoterma de Sips e cinético de ordem fracionária de Avrami foram os que melhor se ajustaram aos dados experimentais. Pelo modelo de difusão intrapartícula foi verificado que a adsorção envolveu mais de uma etapa cinética, a primeira correspondendo à difusão intrapartícula e a segunda atribuída à difusão através dos poros do adsorvente seguida pelo estabelecimento do equilíbrio. As faixas de pH favoráveis à remoção dos corantes laranja reativo e vermelho de prociona pelo C‐PW e AC‐PW foram coincidentes com seus potenciais de carga zero, mostrando que o mecanismo de interação foi eletrostático. O desempenho dos carvões ativados CAC e CPAC na remoção do corante verde brilhante foi efetivo numa faixa de pH mais ampla, variando de 2,0 a 10,5, evidenciando a interação do corante com os anéis aromáticos dos adsorventes. Os adsorventes removeram um alto percentual de corantes têxteis presentes em um efluente sintético, indicando alta capacidade de adsorção, equivalente à de carvões ativos comerciais de alta qualidade a baixo custo de obtenção. A entalpia e a entropia de adsorção dos corantes têxteis pelos adsorventes obtidos foram determinadas em experimentos de adsorção nas temperaturas de 298 K a 323 K, utilizando a constante de equilíbrio de Sips (KS). A magnitude da entalpia foi consistente com uma interação física entre o adsorvente e o adsorvato. Os valores negativos de ΔG indicaram que a adsorção foi espontânea e favorável para todas as temperaturas. Os valores positivos de ΔS° confirmaram a preferência das moléculas dos corantes pela superfície dos adsorventes e sugeriram mudanças estruturais ou acomodações no complexo de adsorção carbono‐corante. / This study was conducted in order to verify the efficiency of removal of textile dyes using the batch adsorption process using adsorbents prepared from the Brazilian pine‐fruit‐shell, Araucaria angustifolia. The materials were obtained by acid carbonization and chemical and physical activation from the Brazilian pine‐fruit‐shell, a food waste that is often overlooked. The Brazilian pine‐fruit‐shell (PW), the carbonaceous material (CPW) and the activated carbon materials (CAC and AC‐PW/CPAC) were tested as adsorbents for the removal of textile dyes from aqueous solution. During the stages of activation, the flow of carrier gas in the reactor, the heating rate and the final temperature were adjusted, in order to obtain activated carbons with high specific surface area and high adsorption capacity. The carbonization and the activation process produced materials with specific surface area higher than the starting material, PW. The contact time required to obtain the adsorption equilibrium using CPW and AC‐PW as adsorbents was different. The activated carbonaceous materials adsorbed the highest percentage of dye in less contact time. The Avrami fractionary order kinetic model provided the best fit to experimental data compared with other models. Equilibrium data were better fit to the Sips isotherm model using C‐PW and AC‐PW as adsorbents. The intra‐particle diffusion model showed that the adsorption processes involve more than one single kinetic stage. The first linear part can be attributed to intra‐particle diffusion and the second stage is the diffusion through smaller pores, which is followed by the establishment of equilibrium. The points of zero charge for both adsorbents confirm the ranges of optimal pH values for orange reactive and procion red removal from aqueous solution, showing an electrostatic interaction. The brilliant green dye amount adsorbed per unit of mass was practically constant for the pH values ranging from 2.0 to 10.5. It reinforced the hypothesis that the mechanism of adsorption should takes place by the interaction of the dye with the aromatic rings of the activated carbon. The adsorbents removed a high percentage of textile dyes present in a synthetic effluent, indicating high adsorption capacity, equivalent to that of high quality commercial coal, with low production cost. The enthalpy and entropy of adsorption of textile dyes were obtained from adsorption experiments ranging from 298 to 323 K, using Sips equilibrium constant (KS). The magnitude of enthalpy is consistent with a physical interaction of an adsorbent with an adsorbate. Enthalpy changes (ΔH°) indicate that adsorption followed endothermic processes. Negative values of ΔG indicate that dye adsorption by activated carbon materials is a spontaneous and favorable process for all studied temperatures. Enthalpy changes indicate that adsorption followed endothermic processes. The positive values of ΔS° confirm a high preference of dyes molecules for the carbon surface of adsorbents and also suggest the possibility of some structural changes or readjustments in the dye‐carbon adsorption complex. Besides, it is consistent with the dehydration of dye molecule before its adsorption to carbon surface, and the releases of these water molecules to the bulk solution.

Identiferoai:union.ndltd.org:IBICT/oai:lume.ufrgs.br:10183/30849
Date January 2011
CreatorsCalvete, Tatiana
ContributorsLima, Éder Cláudio
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0031 seconds