Return to search

Aplicação de cartas de controle multivariadas no controle e garantia da qualidade do biodiesel e suas blendas (B100)

Neste trabalho foi desenvolvida uma metodologia analítica baseada em cartas de controle multivariada associada ao infravermelho médio, para o controle e garantia da qualidade de blendas de biodiesel de sebo (20% e 30%) com biodiesel de soja. Foram construídas três cartas de controle utilizando o Sinal Analítico Líquido (NAS), uma correspondente ao analito (NAS) na amostra (neste caso o biodiesel de sebo), uma dos interferentes que corresponde ao outro constituinte na amostra (neste caso o biodiesel de soja) e uma dos resíduos corresponde que às variações não sistemáticas. Assim foi possível identificar a presença e os teores de biodiesel de sebo acima e abaixo dos pré-estabelecidos na blenda, através da carta NAS que indicou na maioria dos casos avaliados se o de teor de biodiesel de sebo na blenda estava de acordo com as amostras consideradas dentro do controle, em que o teor de biodiesel de sebo foi estipulado em 19-21% e 29,5-31% na blenda. De forma análoga a carta dos interferentes e a carta dos resíduos indicaram adulterações com óleo vegetal in natura e problemas remanescentes do processo de produção como: contaminação com metanol e baixo grau de conversão dos ésteres metílicos. Com base nos resultados alcançados esta metodologia analítica é promissora, pois em uma única análise verifica-se a qualidade do biodiesel de soja e suas blendas com biodiesel de sebo. Desta forma a metodologia proposta pode ser aplicada em análises rotineiras, somando-se as vantagens da espectroscopia no infravermelho, tais como rapidez na análise, utilização de baixa quantidade de amostra e por ser não destrutiva. / In this work was developed analytical methodology based on multivariate control charts associated with the mid-infrared for control and quality assurance of blends of biodiesel from beef tallow (20% and 30%) with soybean biodiesel. The charts have been built using Net Analyte Signal (NAS) generating three control charts: the NAS chart that corresponds to the analyte in the sample (in this case biodiesel tallow), the interference chart corresponds to the other constituent in the sample (in this case only soybean biodiesel) and the chart residues corresponds to nonsystematic variation. Thus it was possible to identify the presence and levels of biodiesel from tallow above and below the pre-established in the blend. Through the NAS chart indicated that in most cases evaluated if the biodiesel content of the blend of tallow was in agreement with the samples considered within the control, wherein the content of biodiesel tallow was set at 19-21% and 29,5-31% in blend. Similarly the chart of interfering and the chart of residues indicated adulteration with vegetable oil in natura and problems remaining the production process as contamination with methanol and low degree of conversion of the methyl esters. Based on the results achieved this analytical methodology is promising, because in a single analysis it is possible check the quality of soybean biodiesel and its blends with biodiesel from tallow. Thus the proposed methodology can be applied in routine analysis, in adding to the advantages of infrared spectroscopy, such as speed of analysis, low amount of sample utilization and nondestructive.

Identiferoai:union.ndltd.org:IBICT/oai:lume56.ufrgs.br:10183/118620
Date January 2014
CreatorsCorrea, Camila
ContributorsFerrão, Marco Flôres
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0088 seconds